Description

30mm Double Dynamic Tii-On Block with High Load Sheave.

Our Tii-On blocks feature a stainless-steel loop at the head of the block. This gives our Tii-On range maximum strength and reliability with minimal cheek separation when tied on and loaded up with a Tii-Shackle. The stainless-steel head loop also ensures the block stays in the right orientation when being used.

High Load Sheave This block features a high load stainless-steel sheave. This upgrade offers even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave. The stainless-steel sheave allows the block to be paired with both rope and wire.

Fitting Instructions Tii-On blocks rely on the correct attachment method to give them maximum strength.

When attaching a Tii-on block you must feed the rope around the central axle and through the head of the block.

When possible, double Tii-on blocks should be attached with a crossed/ through threaded line. See the video below.

This is very important, as it keeps the line load pulling the side cheeks together. Only use a non-crossed Tii-Shackle on low-load applications.

For further fitting advice please contact us.

Becket The large central rivet not only reduces the overall weight but also offers a rope-friendly attachment, perfect as a tie-off point when being used in a cascade system.

Bearings Dynamic Blocks feature our patented bearing system which uses twin rows of stainless-steel ball bearings running on a stainless-steel rail. This provides a superior load-carrying ability and longevity when compared to other bearing systems which run on a plastic rail.

Technical Description FeaturesMetric American Breaking Load 43.31 in 1100 mm Maximum line Diameter 0.31 in 8 mm Maximum Working Load 11.81 in 300 mm Length 1.63 in 41.5 mm Weight 0.13 lb 60 g